1.3inch Cheap 128×64 White Blue Color Mono OLED Display Monochrome Module PMOLED Panel

1.3inch Cheap 128×64 White Blue Color Mono OLED Display Monochrome Module PMOLED Panel

Additional information

Item No.

TT130PM10A

Resolution

128*64

Driver IC

SH1106G

MOQ

2pcs

Lead Time

7 Working days for samples

Product Details

  • Scope

The purpose of this specification is to define the general provisions and quality requirements that apply to the supply of display cells manufactured by G&L. This document, together with the module assembly drawing, is the highest-level specification for this product. It describes the product, identifies supporting documents, and contains specifications.

 

  • Warranty

G&L warrants that the products delivered pursuant to this specification(or order) will conform to the agreed specifications for 12 months from the shipping date. G&L is obligated to repair or replace the products which are found to be defective or inconsistent with the specifications during the warranty period without charge, on the condition that the products are stored in the original packages at 25 degree+_5, 55%+_10%RH or used as the conditions specified in the specifications.

Nevertheless, G&L is not obligated to repair or replace the products without charge if the defects or inconsistency are caused by the force majeure or the reckless behaviors of the customers. After the warranty period, all repairs or replacements of the products are subject to charge.

 

  • Features:
  1. Display Mode: Passive Matrix
  2. Display Color: Monochrome( White/Blue)
  3. Drive Duty: 1/64 Duty

 

  • Mechanical Specifications

1) Outline Drawing: According to the annexed outline drawing

2) Number of Pixels: 128 x 64

3) Panel Size: 34.5×23.0x1.4 (mm)

4) Active Area: 29.42×14.7 (mm)

5) Pixel Pitch: 0.23×0.23(mm)

6) Pixel Size: 0.21×0.21(mm) 7) Weight: 2.18(g)

 

  • General Information
ItemSpecificationsUnit
Display ModePassive Matrix
TypePMOLED
Display ColorMonochrome (White&Blue)
Diagonal Inch1.3inch
Number of dots128*64
Module Size34.5*23*1.4mm
Active Area29.42*14.7
Interface8-bit 6800/8080-series parallel, 3/4 wire SPI, I2C
Driver ICSH1106G
Dot Pitch0.23*0.23mm
Pixel Size0.21x0.21mm

 

 

Company Details

G&L has devoted itself to the manufacturing and development of high-quality products for the Wearable TFT LCD and IOT LCD Displays 0.39inch to 13.3inch Small TFT LCD, Round Circular TN IPS TFT LCD Display, Square TFT LCD, Transflective& Reflective& Sunlight readable TFT LCD Displays, Resistive Touchscreen, Capacitive Touch Panel, OLED Display, and PMOLED LCD Modules, OEM&ODM Customization Solutions.

As a Professional Manufacturer Of small & medium-sized displays, we have manufactured color TFT LCDs Displays of more than 150 models, including 1.09inch round LCD display  240*240, 1.28inch round LCD module, 1.54inch RGB LCD Screen 240*240, 1.6inch QSPI 400*400 LCD Display, 2.1inch and 2.76inch round automotive LCD panel to meet the different requirements for the customers all over the world.

We provide LCD Customization such as FPC design, Capacitive Touchscreen & Resistive Touch Panel, Backlight, and HDMI Driver Board solutions to meet customers’ requests. Free accessories such as Connectors, Cables, and Small breakout boards can be provided, and a three to five years long-term supply is available.

G&L Display is an ISO approved for both quality ISO9001 and environment ISO14001, RoHS certificated manufacturer. As a leading manufacturer in the small TFT display modules market, Toppop will continue to dedicate the research & development, and design, of new technology of LCD, TFT, and OLED displays Solutions. 

Sourcing Agent

G&L Electronics is not only a China Small Color TFT LCD Screen Display Manufacturer but also an OLED display sourcing company. Our main products include a 0.39-inch BOE OLED AMOLED microdisplay & a 0.71-inch SONY micro OLED Screen, and 1.2-inch and 1.39-inch full round AMOLED displays with touchscreen.

We also expanding our product range to flexible OLED screens as well as a transparent OLED display. We have to say, you can find a variety of different displays in our company. Most of our products are widely used in wearable devices, the automotive industry, smart homes, intelligent robots, handheld devices, communication devices, and home security systems. All developed products have passed CE, ROHS, and other certifications.

A: Testing Board

  1. Support transferring needle;
  2. Pin Pitch: 0.3/0.4/0.5/0.8mm;
  3. All kinds of conntecting mode;
  4. Support ODM,60 pin max.

B: Extension Cable

  1.  Length: 10(default)/15cm;
  2. Same or opposite pin direction;
  3. Pin qty: 6-60 pin,0.5mm pitch;
  4. Support custom dimension.

C: Dupont Cable

  1. Hole diameter: 2.54mm;
  2. Length: 10/20/30cm;
  3. Colorful cable,40pcs for 1 group;
  4. Female to male,male to male.

D: Plug in Connector

  1. Pin pitch: 0.3mm;
  2. Support specify brand;
  3. All kinds of pin quantity;
  4. Support ODM,60 pin max.

E: Board to Board Connector

  1. Pin pitch: 0.4mm;
  2.  Support specify brand;
  3. All kinds of pin quantity;
  4. Support ODM,60 pin max.

F: Transferring Board Connector

  1. Pin pitch: 0.5mm;
  2. Support specify brand;
  3. All kinds of pin quantity;
  4. Support ODM,60 pin max.

Customization Solution

  1. Customize FPC: 

1) Appearance can be designed in an arc, rectangle, square, L shape,S shape, etc..free bending, coiling, folding, can be arbitrarily arranged in accordance with the spatial layout requirements, adopt electrolytic copper or copper rolling process design with very good electrical conductivity;

2) FPC interfaces include soldering, plug-in, and B2B connection, the reinforcement materials we commonly use include PI, PET, FR4, steel sheet, aluminum sheet, and so on, which can be selected according to different applications environments.

 

  1. Customize Backlight: 

1) The appearance of the plastic frame can be designed in rectangle, square,round, heterogenic,etc…;

2) The thickness can be designed according to the customer’s requirement;

3) The material is fire retardant PC (URZ2510), adopt PC on light guide plate (LC-1500);

4) All films adopted 3m material;

5) Imported LED common brands(Samsung,Poly);

6) Can add upper and nether iron frame for antistatic design; 

7) The brightness can be customized from 100cd/m2 to 1200cd/m2,average life is more than 40000 hours.

 

  1. Customize Touch Screen:

1) The shape of the cover panel can be designed in rectangle,square, round, heterogenic, etc…;

2) LOGO can be customized in various sizes and colors;

3) The flat surface can be customized in anti-glare and anti-fingerprint;

4)  The materials of glass we can use Corning, Japan Asahi Glass as customer’s demand; 

5) For functions, we can customize single point and multi-point touch; 

6) Common drivers IC normally we use for FPC of the touch panel are FT and ILI;

7) About interface, commonly adopt the I2C interface definition and USB; 

8) For Joint, we adopt OCA laminating for accurate assembling.

 

  1. Customize LCD Glass:

Outline dimension, resolution, thickness, viewing angle(TN/IPS), transmissive, or transflective can be customized as the customer’s requirements.

Applications

Get Your Sample Quickly

We will contact you within 24 hours, please pay attention to the email: “nora@lcdscreenmfg.com“.